COMBO! Precision Glue Press & Replacement Nozzles/Bottle by My Sweet Petunia

This is a clearance item and may not be returned or exchanged. All sales are final. This item is EXCLUDED from our Rewards Program and Free Domestic Shipping Policy due to the deep discount. Thank you!

COMBO! Includes Precision Glue Press plus additional package of Replacement Nozzles (one fine tip, one viscous tip) and one Empty Bottle.

The Precision Glue Press™ provides effortless, consistent and precise adhesive application for extended paper crafting. Your Precision Glue Press™ features a comfort molded handle and trigger, a convenient stand, a choice of regular or Nuvo Deluxe Precision Nozzles, and even a full bottle of 60ml/2 fl. oz Nuvo Deluxe Adhesive. Additionally, an empty bottle is provided should you wish to fill with your own, alternative adhesive. Not to be used with solvent adhesives.  Additional replacement nozzles and empty bottle included!

Nuvo Deluxe Adhesive is a water-based adhesive that cannot be shipped in cold or freezing temperatures.

1. Make sure that the bottle is pushed all the way in the Precision Glue Press™ .
2. Make sure to place the Precision Glue Press™ in the holder all the way and that the nozzle is screwed onto the bottle properly.
3. Check to make sure the tip of the applicator is touching the silicone circle when it's resting in the stand.
4. Always place the Precision Glue Press™ into the stand immediately after use - do not leave the Precision Glue Press™ on your desk - the stand is what "caps" your glue.
5. When you pick it up to use, there may be a glue plug that has formed at the tip - this is normal and part of what keeps the tip sealed. Pull it off by pinching the tip with your fingertips or nail.
6. Make sure that you have the best tip for the type of glue you use. Thicker glue uses the grey tip. Thinner uses the white or clear tip.
7. This Precision Glue Press™ was designed for the Nuvo glue the tool comes with - if you are using other glues, please note that you may have to adjust for that, especially with glues with a higher water content - you may need to cap those after each use.
8. You may have to squeeze the handle a tiny bit more to get it flowing after sitting too long.
9. Drier climates may impact you depending on the glue you use, so adjust as you need to.
10. If you are still having issues. Open the bottle and see if there is an obstruction in the nozzle such as coagulated glue.
11. Make sure the barrel of the applicator is clear before capping.